Demonstrate a good understanding of generative machining using NXCAM module to machine.

MUST USE NX siemens10******
An engineering designer needs to appreciate the advantages and limitations of conventional and computer controlled metal cutting machine tools, to enable products to be economically manufactured. Although the modern trend is towards computer- aided manufacture (CAM) with all the instructions for machine operation fed to the machine as a command signal, each operation has to be broken down and analysed so that the most efficient program can be used by the computer. Therefore a thorough knowledge of basic machining operations is a pre-requisite before CAM can be efficiently utilised.
In this assignment students are required to demonstrate a good understanding of generative machining using NXCAM module to machine the parts as shown below, also good handling of the machining parameters such as; the spindle speed, the machine federate, step-over/scallops for tool path optimisation and finally the type of cutting tools required for each machining operation. The machining time optimisation in order to achieve the final design geometry is also quite important in this assignment. The students are also free to re-design the part to ease the manufacturing.

Type of paper Academic level Subject area
Number of pages Paper urgency Cost per page:
 Total:

Last Completed Projects

# topic title discipline academic level pages delivered
6
Writer's choice
Business
University
2
1 hour 32 min
7
Wise Approach to
Philosophy
College
2
2 hours 19 min
8
1980's and 1990
History
College
3
2 hours 20 min
9
pick the best topic
Finance
School
2
2 hours 27 min
10
finance for leisure
Finance
University
12
2 hours 36 min